|
|
See! Diagnose! Cure!
X-ray diagnostic system RF-type BLADE, ARCOM (Italy)
- First workplace - Tilting table (TT) BLADE equipped with spot film device.
Spot film device (SFD) is equipped with the front loading cassette system, with automatic centering. SFD is able to use cassettes from 18x24 to 35x35 and dividing picture 2-3-4-6-8.
X-ray image intensifieris located on the SFD:
Standardly 9"(9"/6"/4.5") Toshiba with CCD camera 1 Megapixel with TV system and 19" monitor.
- Table deck size 2100h770 mm;
- Longitudinal movement of the table deck - + 600mm (towards the head) - 400mm (in the direction of the feet);
- Transverse movement of the deck - ±110mm;
- Table rotation +90°/-15° by Trendelenburg.
All movements of the table are motorized with microprocessor control.
Movement control of the table is operated by using handy joystick on the front panel of SFD.
- Second workplace - Bucky table is designed for direct and oblique images of patients in a prone pose, standing pose and lateroposition.
It completes with an image table AIN or image table UPPER (with elevator) and tube stand ETS. Also tables configuration are provided such as fixation devices for the cassettes (bucky units), and digital DR detector on the base of Flat panel.
More detailed information on page 2 X-ray diagnostic system RAD-type, ECLYPSE.
- Third workplace - Bucky stand DTR allows to do images of the chest, as well as other radiographic images in a standing position.
Stands can be equipped with digital x-ray image detectors
More detailed information in the section X-ray diagnostic system RAD-type, ECLYPSE.
- The high-frequency power supply (X-ray generator).
We use X-ray generators INDICO100, INDICO IQ for X-ray system BLADE from well-known Canadian producer CPI («Communications & PowerIndustriesCanada Inc.»).
It uses high-frequency X-ray power supply units (400 kHz) with capacity of 50 kW, 65 kW, and 80 kW.
For more details, see page High-frequency X-ray generators.
- . X-ray tubes.
For a complete set for fluoroscopy and radiography we use tubes production Toshiba (Japan), (optional: Dunlee (Germany).
For more details, see «X-ray tubes».
As optional (additional) we can offer you:
- Recommend to use We recommend using the monochrome diagnostic monitors JUSHA (optional WIDE) (in the case of a complete set of digital X-ray image detector);
- devices for determining patient dose (dosimeter);
- set of cassettes;
- automatic exposure control systems;
- Medical printers for hard copies photofluorogram on a special X-ray film (in the case of a complete set of
digital X-ray image receiver).
Dimensions of X-ray diagnostic system BLADE »
This system is completed Dose Area Product Measuring System VacuDAP and Ionization Chambers AEC Sensor, the use of which is mandatory according to Article 17 of the Law of Ukraine «On the protection of humans from the impact of ionizing radiation».
Explanation of the information and advertising nature of the information posted on the site.
Dear visitors of our site. All information contained on the site is for informational and advertising purposes only. The information provided on the site is not exhaustive.Technical specifications may be changed or supplemented at any time.
This information cannot be used as official document, for example, for the preparation of the technical part of the tender documentation.
For more information, contact our experts. Contact Us >>
|
